Triple-Arch Hantile 32W industrial-grade BIPV solar roofing tile for large-scale projects
Home

Home Energy Storage Battery

Off‑Grid Solar Power Kit | MPPT Controller + LFP Battery + Off‑Grid Inverter

Off‑Grid Solar Power Kit | MPPT Controller + LFP Battery + Off‑Grid Inverter

The GreenMore Off-Grid Solar Power Kit is a fully integrated renewable energy solution combining a 3KW/5KW pure sine wave inverter, MPPT solar charge controller, LiFePO₄ battery pack and smart BMS in one compact unit. Built with fully digital dual closed-loop control and SPWM technology, it delivers clean, stable AC power for residential, commercial and mission-critical loads. The system supports AC/PV priority charging, hybrid modes and automatic battery activation, making off-grid deployment straightforward.

The kit also works as a UPS with seamless switchover, protecting sensitive equipment during power interruptions. Multi-layer protection covers overcharge, over-discharge, short circuit and temperature extremes, with intelligent air cooling for quiet indoor operation. Available in two standard configurations, 5.12kWh and 10.24kWh. Certified with CE, IEC, MSDS and UN38.3. 3-year warranty.

  • Item No :

    GM-LE5K
  • Payment :

    TT/LC
  • Product Origin :

    China
  • Custom Made :

    Yes
  • Shipping Port :

    20 days
  • Lead Time :

    Shanghai, Nanjing, Ningbo, Guangzhou, Shenzhen, etc.
  • Warranty :

    3 years
  • Product Details

Key Features

All-in-one off-grid solar system integrating inverter MPPT battery and BMS

All-in-One Design

Pure sine wave output with SPWM technology and over 90% peak efficiency

Pure Sine Wave 90%+

UPS-grade seamless switching for uninterrupted backup power supply

UPS Switching

Grade-A LiFePO4 cells with 6000 cycles and long design life

Grade-A LiFePO₄

All-in-One Integrated System

Inverter, MPPT controller, LFP battery pack and BMS arrive in one unit. No separate sourcing or complex wiring — installation and commissioning are noticeably faster for installers.

Pure Sine Wave & SPWM Control

Fully digital dual closed-loop control with SPWM output gives peak efficiency above 90% and AC voltage distortion under 3% — safe for medical devices, servers and smart home systems.

UPS-Grade Switchover

Mains bypass and inverter modes run with full-power UPS function. When grid power fails, the system transfers to battery automatically, keeping refrigerators, lighting and communication gear running.

Grade-A LiFePO₄ Cells

6,000+ cycles at 80% DOD support 15+ years of daily use, with real-time cell monitoring from the smart BMS and deep-discharge capability.

Flexible Charging Logic

AC/PV priority, PV-only and hybrid charging modes, plus generator input — the kit adapts to fully off-grid sites and regions with unreliable supply alike.

Quiet Intelligent Cooling

Temperature-controlled fans keep noise below 55dB indoors, with multi-layer electrical protection and CE, IEC, MSDS and UN38.3 certification.

System Components

MPPT Charge Controller

High-efficiency MPPT tracking maximizes PV harvest, with priority/hybrid charging logic and built-in overvoltage and over-temperature protection.

Off-Grid Inverter

Fully digital dual closed-loop control with SPWM pure sine wave AC and full-power UPS mode for sensitive electronics.

LiFePO₄ Battery Pack

Lithium-only architecture with smart activation, long cycle life, deep-discharge capability and an optimized charging curve.

Battery Management System

Real-time monitoring of voltage, current, SOC and temperature, with OVP/OCP/SCP/OTP protection and coordinated inverter control.

AC/DC Distribution Module

Integrated circuit breakers and surge protection handle priority switching and hybrid charging, keeping the load supply stable.

Monitoring Interface

LCD/APP display of live system status, configurable charging and UPS settings, plus fault alarms and logs for maintenance.

Technical Specifications

Model GM-LE3K GM-LE5K
Mains Input
Rated Input Voltage 220VAC 220VAC
Input Voltage Range 185–280V (±2%)
Frequency Range 47–55Hz (50Hz) / 57–65Hz (60Hz)
Overload Current 40A
Max AC Charging Current 20A
Battery (Internal)
Battery Type LiFePO₄ battery
Battery Rated Voltage 48V
Battery Voltage Range 45–60V
No-load Loss <1A
Rated Energy 5.12kWh 10.24kWh
PV Input
Maximum Input Power 2800W 4500W
Input Voltage Range 60–145VDC
Recommended PV String Voltage 105V
Charging Method MPPT
MPPT Trackers 1 1+1
Max PV Charging Current 50A 40+40A
AC Output
Rated Output Power 3000W 5000W
Maximum Output Power 5000VA 8000VA
Rated Output Voltage 220V ±5%
Output Frequency 50/60Hz ±1%
Output Waveform Pure sine wave
AC Voltage Distortion <3% (linear load)
Peak Efficiency >90%
Overload Protection 120% load: shuts off after 1 minute; 150% load: shuts off after 10 seconds
General Parameters
Isolation Method High-frequency isolation
Protection Level IP20 (indoor use)
Cooling Method Intelligent air cooling
Relative Humidity 5–95%, no condensation
Operating Temperature -20°C to +45°C
Max Altitude 2000m
Noise <55dB
Display LCD + LED
Communication RS485-RTU
Reference Weight 75kg 120kg
Reference Dimensions (W×D×H) 600×550×720mm 600×550×920mm
Warranty 3 years

Note: Product dimensions and parameters are subject to the actual delivered product. Updated on October 1, 2026.

Application Scenarios

Remote off-grid cabin powered by GreenMore solar energy system

Remote Homes & Cabins

Round-the-clock power for lighting, refrigeration and entertainment, with zero fuel costs and minimal upkeep.

Solar-powered farm and agricultural irrigation system

Farms & Ranches

Powers irrigation, ventilation and feeding equipment in sheltered farm buildings across wide seasonal conditions.

Solar PV and green energy storage for sustainable power supply

Telecom Base Stations

A clean, low-running-cost alternative to diesel generators, with isolation, RS485 monitoring and quiet cooling.

Distributed solar microgrid and energy storage in rural community

Rural Electrification

Silent, emission-free electricity for community lighting and small public facilities, with UPS protection.

Rooftop solar PV energy storage backup power for residential homes

Unstable Grid Backup

Reliable backup in regions with frequent outages keeps critical home and business equipment running.

Safety & Quality Assurance

Certifications & Compliance

CE, IEC, MSDS and UN38.3 certification covers international safety and battery transportation standards; every unit is full-capacity tested before shipment.

Multi-Level BMS Protection

Real-time monitoring with overcharge, over-discharge, over-current, short-circuit, over-temperature and cell imbalance protection for long-term consistency.

Quality Commitment

Since 2017 GreenMore has focused on safe, reliable off-grid storage built with Grade-A cells from qualified suppliers, under control from incoming material to final test.

Trusted Support
Remote technical guidance for installation and commissioning, RS485-based monitoring, and a 3-year warranty with repair or replacement service for customers across Europe, the Americas, the Middle East and Africa. Explore our full home energy storage range.

FAQ

Q1: What is included in the kit?

Everything is pre-assembled in one compact unit — off-grid inverter, MPPT controller, LiFePO₄ battery pack and BMS — ready for deployment without sourcing separate parts.

Q2: Can it work as a UPS?

Yes. Mains bypass and inverter output transfer automatically when the grid fails, keeping refrigerators, communication devices and lighting running without interruption.

Q3: What charging modes are supported?

AC/PV priority, PV-only and hybrid charging, plus generator input — flexible enough for fully off-grid sites and unstable-grid regions.

Q4: Is the battery safe indoors?

Grade-A LFP cells are thermally stable and non-toxic, with multi-layer BMS protection against overcharge, short circuit and temperature extremes.

Q5: What environments suit the system?

Indoor, sheltered installations from -20°C to +45°C, humidity up to 95%, altitude up to 2000m, with noise below 55dB and an IP20 rating.

Q6: How long will the battery last?

Grade-A LFP cells offer 6,000+ cycles at 80% DOD, supporting 15+ years of daily use. The 3-year warranty covers manufacturing defects and BMS failures.

Q7: What after-sales support is provided?

Remote installation and commissioning guidance, RS485 monitoring and a 3-year warranty with engineering support across four continents.

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subscribe To Our Newsletter

Stay up to date with GreenMore. We share new BIPV solar tile releases, product and certification updates, and field notes from our projects — no fluff, just the things that matter to installers, distributors, and system integrators. If there's something you'd like to see covered, drop us a line — we read every reply.

Copyright @ 2026 GreenMore All Rights Reserved. Network Supported

Sitemap / Blog / Xml / Privacy Policy

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Home

Products

WhatsApp

contact