Welcome to GreenMore
Welcome to GreenMore
6kW All‑in‑One Solar + Battery Storage System | Off‑Grid Inverter + Battery Backup System for Homes & Remote Sites
The GreenMore 6kW All-in-One Solar + Battery Storage System is a fully integrated off-grid power solution combining a 6kW pure sine wave inverter, MPPT solar charge controller and 15.36kWh LiFePO₄ battery in a single compact unit. Its 51.2V stackable architecture uses three 5.12kWh modules and supports flexible capacity expansion. The system accepts PV input from 80V to 450V, as well as grid and generator charging, making it suitable for homes, farms, cabins and remote sites where grid power is unreliable or unavailable.
Built with Grade-A LiFePO₄ cells and an intelligent BMS, the ESS protects against overcharge, over-discharge, short circuit and temperature extremes, while air cooling keeps noise below 60dB. Real-time status is available through the GreenMore mobile app, with RS485, CAN, WiFi and GPRS connectivity. Certified CE, IEC, MSDS and UN38.3, and backed by a 3-year warranty for customers across Europe, the Americas, the Middle East and Africa.
Item No :
GM-LEB6KPayment :
TT/LCProduct Origin :
ChinaCustom Made :
YesShipping Port :
Shanghai, Nanjing, Ningbo, Guangzhou, Shenzhen, etc.Lead Time :
20 daysWarranty :
3 years
All-in-One Integration
15.36kWh LFP
Stackable Design
App Monitoring
OEM/ODM Ready
The 6kW inverter, MPPT controller and LFP battery arrive in one unit, cutting wiring complexity and installation time while improving reliability on off-grid sites.
Three 51.2V LFP modules deliver long cycle life and strong thermal stability, with multi-layer BMS protection for consistent residential and remote-site performance.
Modular battery blocks let installers and distributors match different load requirements and add capacity later as energy demand grows.
Up to 6000VA continuous and 12000VA peak with THD under 3%; EPS transfer takes as little as 10ms, keeping sensitive loads running.
Real-time monitoring over CAN/RS485, WiFi and GPRS enables remote diagnostics and load management for installers and homeowners alike.
Air-cooled thermal management keeps the cabinet below 60dB across -10°C to +50°C, with OEM/ODM options for housing, branding and protocols.
Stable AC for home and commercial loads, with solar, grid and generator input modes and fast switching for uninterrupted backup.
High-safety 51.2V LFP chemistry with up to 90% usable capacity, long cycle life and a stackable modular structure.
Wide PV voltage range with a fast tracking algorithm, supporting up to 6kWp arrays for off-grid charging.
Multi-layer voltage, current and temperature protection, CAN/RS485 monitoring and automatic cell balancing.
Stable running in hot and cold climates with a quiet, low-maintenance cooling structure for consistent long-term performance.
OEM/ODM branding and design options in a durable indoor enclosure, with a modular structure that simplifies installation and logistics.
| Model | GM-LEB6K |
| PV Input | |
| Maximum PV Array Power | 6000Wp |
| Maximum Input Voltage | 500V |
| Start-up Voltage | 100V |
| MPPT Voltage Range | 80–450V |
| Full-Load MPPT Voltage | 280–400V |
| MPPT Channels / Strings per Channel | 1 / 1 |
| Maximum Input Current | 22A |
| AC Input (Mains) | |
| Rated Input Voltage | 230V |
| Selectable Voltage Range | 170–280V (UPS) / 120–280V (appliances) |
| Undervoltage / Recovery | 170±7V / 180±7V (UPS); 120±7V / 130±7V (appliances) |
| Overvoltage / Recovery | 280±7V / 270±7V |
| Maximum Input Voltage | 300V |
| Rated Input Frequency | 50/60Hz adaptive |
| Efficiency | |
| AC Power Mode | >95% (purely resistive load, battery full) |
| Maximum Efficiency | 93% |
| Max Bypass Overload Current | 40A |
| Emergency Power Output (EPS) | |
| Rated Output Power | 6000VA |
| Maximum Output Power | 12000VA |
| Maximum Output Current | 26A |
| Rated Output Voltage | 230V ±5% |
| Output Frequency | 50Hz |
| THD (Linear Load) | <3% |
| Switching Time | 10ms (UPS) / 20ms (appliances) |
| Battery | |
| Battery Cells | LiFePO₄ 3.2V / 100Ah |
| Rated Capacity | 15.36kWh (3 modules) |
| Rated Voltage | 51.2V |
| Operating Voltage Range | 44.8–58.2V |
| Maximum Charge / Discharge Current | 300A / 400A |
| Maximum Depth of Discharge | 90% |
| Cycle Life | 6,000+ cycles @80% DOD |
| General Parameters | |
| Protection Level | IP54 |
| Cooling Method | Air cooling |
| Relative Humidity | 5–95%, non-condensing |
| Operating Temperature | -10°C to +50°C |
| Noise | <60dB |
| Display | LCD |
| Communication | RS485 / CAN / WiFi / GPRS |
| Weight | 166kg |
| Dimensions (W×D×H) | 560×160×1796mm |
| Certification | CE, IEC, MSDS, UN38.3 |
| Warranty | 3 years |
Note: Product dimensions and parameters are subject to the actual delivered product. Updated on October 1, 2026.
Houses and cabins without grid access get a complete self-sufficient setup. With an array up to 6kWp, the system runs lighting, refrigeration, cooking and entertainment around the clock, with no fuel costs and little upkeep.
Remote farms and barns with weak or absent grid power can run irrigation pumps, ventilation, lighting and electric fencing, adding battery modules as the operation grows.
Where blackouts or voltage fluctuations are frequent, the built-in EPS transfers to battery in as fast as 10ms, keeping refrigerators, medical equipment and communication devices online until the grid returns.
Telecom towers, monitoring stations and off-grid shops get dependable year-round power in an IP54 cabinet rated for -10°C to +50°C — a quiet alternative to diesel generators.
CE, IEC, MSDS and UN38.3 certification covers international safety and battery transport; every unit is full-capacity tested before shipment.
Voltage, current and temperature monitoring with overcharge, over-discharge, short-circuit and imbalance protection, plus automatic cell balancing.
Since 2017 GreenMore has focused on safe, reliable off-grid storage built with Grade-A LFP cells, under control from incoming material to final test.
Trusted Support
Wiring diagrams, installation manuals and remote technical guidance, app-based diagnostics, and a 3-year warranty with dedicated engineering support for distributors and installers. Explore our full home energy storage range.
Wiring diagrams, installation manuals and remote technical guidance come as standard; the modular 51.2V design keeps on-site labor time low.
Yes. Housing color, logo branding, communication protocols and battery configuration can be tailored to different regional standards.
The stackable 51.2V architecture expands from one unit to a multi-unit parallel deployment, suitable for growing loads and EPC projects.
Technical training, remote app diagnostics, spare-parts supply and a 3-year warranty, with full documentation and ongoing engineering help.
Yes. MPPT covers 80–450V PV input, and the inverter accepts grid or generator power for flexible deployment across site types.
Grade-A LFP cells are rated for 6,000+ cycles at 80% DOD, supporting 15+ years of daily use under normal conditions.
Stay up to date with GreenMore. We share new BIPV solar tile releases, product and certification updates, and field notes from our projects — no fluff, just the things that matter to installers, distributors, and system integrators. If there's something you'd like to see covered, drop us a line — we read every reply.
Copyright @ 2026 GreenMore All Rights Reserved. 
Network Supported
Sitemap / Blog / Xml / Privacy Policy
