Large-area BIPV curved solar tile roof array for commercial buildings by GreenMore
Home

solar battery offer

solar battery offer

  • Home Energy Storage Batteries in Australia
    Home Energy Storage Batteries in Australia Jul 03, 2025
    Two Reasons a Battery Gets Bought In Australia a home battery gets bought for one of two reasons, and they lead to different sums. The first is the bill. The second is the blackout after the last storm season, and the feeling that the freezer should not be the thing that decides whether the family eats well that week. The bill case is easy to state. You buy electricity for 25 to 42 cents a unit depending on where you live, and you are paid half a cent to 12 cents for the surplus your roof sends back. The battery earns the difference on every unit it moves from midday to evening. The blackout case has no clean arithmetic, which is why it wins arguments. Network, 2026-27 You pay, c/kWh You are paid, c/kWh The gap SA Power Networks 41.91 0.5 to 8 about 35 NSW Essential Energy 35.01 3.4 to 6.5 about 30 NSW Ausgrid 33.14 3.4 to 6.5 about 28 WA Synergy A1 33.26 2 to 10 about 28 SEQ Energex 27.97 1 to 8 about 23 Northern Territory 31.68 9.33 to 18.66 about 18 Tasmania 24.75 9.276 about 15 These are the regulated residential flat-rate benchmarks from 1 July 2026, GST included. Market offers move around them. The gap is the business case That last column is the whole story. In South Australia a stored unit is worth about 35 cents more than an exported one, so a battery shifting 13 units a day moves nearly four and a half dollars of value daily. In Tasmania the same battery moves less than two. Payback varies by a factor of two across state lines, and a quote that looks expensive in Hobart can be reasonable in Adelaide. What a Battery Actually Stores Three numbers sit between the label on the box and the energy that reaches your kettle. Suppliers quote the first and stay quiet about the other two. Usable is not nameplate A unit sold as 16 kWh often holds 14 kWh you can draw. The rest protects the cells from a full discharge and never leaves the box. The federal rebate is calculated on usable capacity, and so is every saving estimate worth reading, so check the datasheet before comparing prices per kilowatt-hour. Round-trip efficiency Energy in and energy out are not the same quantity. A DC-coupled system, where the battery sits on the same DC bus as the panels, loses 5 to 8 per cent in the round trip. An AC-coupled system, charging through its own inverter from an existing solar supply, loses 8 to 12 per cent. On a 13.5 kWh battery that is about half a unit a day, or 180 units a year. At South Australian rates that is 75 dollars a year, every year. Depth of discharge Depth of discharge is how much of the usable capacity the control system will use. LFP packs run to 90 or 100 per cent without complaint, where older nickel chemistries were held to 80 per cent to reach their rated cycle count. A 10 kWh LFP battery at 95 per cent gives 9.5 units. A 10 kWh NMC at 80 per cent gives 8. Chemistry: LFP Against NMC Nearly every battery sold into Australian homes is lithium iron phosphate, and the reason is not marketing. LFP is rated for 6,000 to 8,500 cycles to 80 per cent of original capacity, against 3,000 for nickel manganese cobalt. It also tolerates heat better, which matters in a garage that reaches 45 degrees in February. NMC still wins on weight, 150 to 220 watt-hours per kilogram against 90 to 120 for LFP. In a car that gap decides the design. On a garage wall it decides nothing. The number that settles it is lifetime cost per usable kilowatt-hour delivered: installed price divided by usable capacity times rated cycles. Quality LFP lands near 20 cents, a cheaper NMC unit near 33. The lower sticker price is the more expensive battery to own. The Specs That Decide the Outcome Figure Typical range What it decides Usable capacity 90 to 95% of nameplate The rebate, the savings and the sizing Round-trip efficiency 92 to 95% DC, 88 to 92% AC How much of each stored unit comes back Continuous power 5 kW on a 10 kWh system How many appliances run at once Peak power 7 to 10 kW for 10 to 30 seconds Whether a pump trips the system Depth of discharge 90 to 100% LFP, 80 to 90% NMC Multiplies into usable capacity Cycle life 6,000 to 8,500 LFP, 3,000 NMC Divided by annual cycles, gives service life Backup transfer time 10 to 20 ms, under 10 ms for UPS grade Whether a desktop computer restarts IP rating and temperature range IP21 indoors, IP65 outdoors, minus 10 to 50 degrees Garage wall or exterior wall, and summer heat Warranty 10 years, to 60 or 70% capacity The throughput clause matters more than the years Continuous power is the spec buyers skip and then notice. A 10 kWh battery with a 5 kW inverter will not run a ducted air conditioner, an oven and a pool pump together, whatever is left in the pack at nine in the evening. Sizing It Against Your Evening A working household uses 30 to 40 per cent of its electricity while the sun is up. The rest lands between the evening peak and the following morning, and that is the load a battery covers. Sizing on total daily consumption, as most calculators do, gives a number that is too large and a payback that is too optimistic. Generation peaks before the household does. The shaded block is what a battery is for. A worked example, South Australia A four-person home on 20 kWh a day, with a 6.6 kW array generating 26 kWh on an average day. Electricity at the SA Power Networks benchmark of 41.91 cents, exports at 5 cents. Line No battery 13.5 kWh battery Generated 26 kWh 26 kWh Used directly in daylight 7 kWh 7 kWh Exported 19 kWh 4.3 kWh Bought in the evening 13 kWh 1 kWh Daily net cost 4.50 AUD 0.20 AUD Annual net cost 1,643 AUD 74 AUD Annual saving none 1,569 AUD Installed after rebate none 11,360 to 13,360 AUD Simple payback not applicable 7.3 to 8.5 years At the NSW Ausgrid rate of 33.14 cents the saving falls to about 1,180 dollars a year, stretching payback past ten years. Same battery, same roof, different postcode. With solar, and without A battery can be installed without panels. It charges overnight on a time-of-use tariff and discharges into the evening peak, and in South Australia that arbitrage is real money. What it cannot do is claim the federal rebate, which requires a connection to new or existing solar. If you already own a solar inverter, AC coupling is cheaper, because nothing on the roof gets replaced. If the array is going in at the same time, a DC-coupled hybrid inverter usually wins on efficiency and total cost. What It Costs in Australia in 2026 Usable capacity Installed, before rebate Federal rebate You pay 5 kWh 6,000 to 9,000 AUD about 1,200 AUD 4,800 to 7,800 AUD 10 kWh 9,000 to 15,000 AUD about 2,400 AUD 6,600 to 12,600 AUD 13.5 kWh 11,000 to 18,500 AUD about 3,200 AUD 7,800 to 15,300 AUD 20 kWh 16,000 to 26,500 AUD about 4,200 AUD 11,800 to 22,300 AUD Across the models on the market, installed cost runs from about 660 to 1,490 dollars per usable kilowatt-hour before the rebate. The spread is wider than the specification differences justify, so collect three quotes. The federal rebate, and its taper The Cheaper Home Batteries Program pays a discount through small-scale technology certificates, applied by the installer at the point of sale. You claim nothing. The rate follows your installation date, not the day you sign, and it falls every six months: 6.8 certificates per usable kilowatt-hour from May to December 2026, then 5.7 from January 2027. Since May 2026 the factor also tapers by size. The first 14 kWh earn the full rate, 14 to 28 kWh earns 60 per cent, 28 to 50 kWh earns 15 per cent, and nothing above 50 kWh earns anything. A 13.5 kWh battery collects about 3,200 dollars. A 28 kWh battery collects about 5,600, which is 200 dollars per kilowatt-hour rather than 240. Two conditions catch people out. The battery must be on the Clean Energy Council approved list, checked by model rather than brand, and fitted by an accredited installer. The rebate is also one per address, permanently. Standards and Certification Standard Scope Where it applies AS/NZS 4777.2 Grid connection of energy systems via inverters Every grid-connected inverter, including battery inverters AS/NZS 5139 Safety of battery systems for use with power conversion equipment Location, ventilation, fire separation and labelling IEC 62619 Safety of industrial lithium cells and batteries Cell and pack level, the base requirement IEC 63056 Secondary cells for electrical energy storage systems More specific to stationary storage than 62619 UN 38.3 Transport of lithium batteries Every imported pack has to pass it CEC approved list Product eligibility for the rebate Checked by model, not by brand AS/NZS 5139 is the one that changes where the battery goes. It sets clearance distances, restricts installation in habitable rooms, and requires signage for emergency services. A quote that does not say where the unit will be mounted is not a complete quote. The Clean Energy Council maintains the approved battery products list, and the certificates behind the rebate are issued under the Small-scale Renewable Energy Scheme. Check both against the exact model on your quote, because eligibility does not carry between similar units from the same brand. Where the Numbers Stop Working Oversizing. Past 14 kWh the rebate falls to 60 per cent and then 15, while the extra capacity sits idle on all but the longest evenings. Size to your evening load, not your daily total. Expecting the supply charge to disappear. The daily charge pays for the connection, not the units. No battery removes it, and in South Australia it is 1.80 dollars a day. Assuming the payback fits inside the warranty. In New South Wales the arithmetic above stretches past ten years, against a warranty of ten years to 60 or 70 per cent capacity. You are not losing money, but you are not clearly making any either. What GreenMore Supplies We build LFP home storage from 5 to 30 kWh, in stackable modules that let a system grow with the household rather than being replaced when the family buys an electric car. Every unit is IEC 62619 tested, UN 38.3 certified, and documented for AS/NZS 5139 installation. The all-in-one home energy storage system pairs the pack with a hybrid inverter in one enclosure, which removes the compatibility question between battery and inverter that causes most of the field failures we see. For projects that already have a solar inverter, the stackable battery modules work as an AC-coupled addition instead. If you are sizing for a specific house or development, send the load profile and the state, and we will run the numbers against the tariff that applies. Frequently Asked Questions Is 10 kWh enough for an Australian home? For two or three people using 12 to 18 kWh a day, yes. It covers a normal evening with a small margin. A four-person home on 18 to 22 kWh a day, particularly with ducted air conditioning into the evening, is better served by 13 to 14 kWh. Can I install a battery without solar panels? Yes, and it can still save money by charging overnight on a time-of-use tariff and discharging into the evening peak. It will not qualify for the federal rebate, which requires a connection to solar. Will a battery run my whole house during a blackout? Only if the system is wired for it. Whole-home backup needs a gateway or transfer switch and a battery rated for the full service capacity of the house. Most installations cover essential circuits only: lights, refrigeration, internet and a few power points. How long will a home battery last? An LFP unit rated for 6,000 cycles, cycled once a day, is designed for well over a decade. Most Australian warranties run ten years to 60 or 70 per cent of original capacity. Read the throughput clause as well as the years, because a warranty that caps total energy delivered can expire before the calendar does. My garage gets very hot in summer. Is that a problem? It shortens life. LFP tolerates heat better than nickel chemistries, but sustained operation above 40 degrees adds 1 to 2 per cent of calendar ageing a year on top of cycle wear. A shaded exterior wall with an IP65 cabinet is often better, provided AS/NZS 5139 clearances are met. Should I wait for prices to fall? The rebate falls faster than hardware prices do. The certificate factor drops from 6.8 to 5.7 on 1 January 2027, which takes roughly 500 dollars off a 13.5 kWh system, and it steps down every six months after that. Waiting has a measurable cost, and it has been larger than the price decline. PL Peter Lu Energy Storage Product Manager, GreenMore Works on residential and commercial storage sizing, with a focus on matching battery capacity to real load profiles rather than nameplate rules of thumb. Updated on November 17, 2026

Subscribe To Our Newsletter

Stay up to date with GreenMore. We share new BIPV solar tile releases, product and certification updates, and field notes from our projects — no fluff, just the things that matter to installers, distributors, and system integrators. If there's something you'd like to see covered, drop us a line — we read every reply.

Copyright @ 2026 GreenMore All Rights Reserved. Network Supported

Sitemap / Blog / Xml / Privacy Policy

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Home

Products

WhatsApp

contact