Large-area BIPV curved solar tile roof array for commercial buildings by GreenMore
Home

Home Energy Storage System Manufacturers

Home Energy Storage System Manufacturers

  • Is a Home Battery Worth It? The Payback Numbers by Market
    Is a Home Battery Worth It? The Payback Numbers by Market Jun 25, 2025
    Whether a home battery is worth it is not a product question. It is a question about your electricity bill, and the answer moves by a factor of five depending on where that bill comes from. A 13.5 kWh battery in South Australia returns about 1,569 Australian dollars a year. The same battery in a US state that credits exports at the full retail rate costs you 179 dollars a year. Both numbers are correct. The variable is the tariff, not the hardware, and no brochure quoting one payback figure is telling you the truth. Three Ways a Battery Earns Its Keep A battery does not generate electricity. It moves it in time, and earns money only when the price on one side of that move differs from the price on the other. Value stream How it works Where it matters Solar self-consumption Stores surplus solar that would otherwise be exported at a low rate, and uses it in the evening instead of importing Wide gap between the retail tariff and the export rate Time-of-use arbitrage Charges from the grid off-peak and discharges on-peak, capturing the spread A peak-to-off-peak ratio of 2x or more, with or without solar Backup power Keeps essential loads running during an outage Frequent or long outages; this is insurance, not income The first two are arithmetic. The third is not. Backup has real value, but no payback period. Price it separately, and do not let it prop up a savings case that does not stand alone. What Households Pay in Five Markets These are 2026 residential figures, from the regulator or national statistics office in each market rather than from a supplier page. Market What you pay What an export earns Source South Australia 41.91 c/kWh 0.5 to 8 c/kWh AER default offer, 2026-27 Germany 37.3 c/kWh 5.50 to 12.34 c/kWh BDEW average, 2026 United Kingdom 26.32 p/kWh no floor above zero Ofgem cap, Oct to Dec 2026 United States 18.19 c/kWh 5 c to full retail, by state EIA, 2026 to August South Africa 355.56 c/kWh often nothing Eskom Homepower, 2026-27 The spread between buy and sell price is the entire business case: about 37 cents in South Australia, 28 in Germany, 21 in the UK, and between 13 cents and zero in the United States, depending on whether the state still credits exports at retail. The EIA publishes the US series monthly; the German average comes from the BDEW price analysis. Subsidies in 2026: Two Have Closed, One Is Tapering Three of these markets changed their support for home storage in the last eighteen months. Two removed money, and much published material has not caught up. Market Status in 2026 What it is worth Australia Running, tapering every six months about 272 AUD per usable kWh; 10 kWh claims about 2,720 AUD Germany No federal grant; KfW 442 closed with no successor 0% VAT when supplied with a PV system, about 16% of the invoice United Kingdom Zero VAT on installed batteries until 31 March 2027 about 833 GBP on a 5,000 GBP install, then 5% United States Section 25D ended 31 December 2025 nothing, with no phase-down and no partial credit South Africa No national residential storage grant value comes from avoided tariff increases The Australian taper, in numbers The federal Cheaper Home Batteries Program issues small-scale technology certificates against usable capacity, with a step-down: full rate up to 14 kWh, 60% from 14 to 28, 15% from 28 to 50, nothing above. The factor drops every six months, from 6.8 in the second half of 2026 to 5.7 in the first half of 2027. At roughly 40 dollars a certificate, a 10 kWh system claims about 68, or 2,720 dollars. Identical hardware in 2028 claims less. That is a deadline rather than a sales tactic, and eligibility is settled by model on the CEC register, not by brand. The two that closed Germany ran its KfW 442 package out of money within weeks of opening in 2023, and no successor exists. What remains is the zero VAT rate under section 12(3) of the German VAT act when the battery is supplied with a PV system: about 1,916 euros on a 12,000 euro invoice, because the 19% comes off the gross price. The United States is the sharper change. Section 25D paid 30% of the cost of a residential battery of 3 kWh or more. The One Big Beautiful Bill Act, signed in July 2025, terminated it for expenditures after 31 December 2025, with no reduced rate in 2026, not 26% and not 22%. A quote still advertising 30% on a 2026 installation is wrong, and that is a useful test of whoever is quoting it. The test is when installation finished, not when the deposit was paid. What a Battery Costs Before Any Subsidy These are Australian installed prices, the ones we can source most precisely. Other markets differ by labour and certification cost, not by structure. Usable capacity Installed, before rebate Federal rebate You pay 5 kWh 6,000 to 9,000 AUD about 1,200 AUD 4,800 to 7,800 AUD 10 kWh 9,000 to 15,000 AUD about 2,400 AUD 6,600 to 12,600 AUD 13.5 kWh 11,000 to 18,500 AUD about 3,200 AUD 7,800 to 15,300 AUD 20 kWh 16,000 to 26,500 AUD about 4,200 AUD 11,800 to 22,300 AUD Per usable kilowatt-hour that is 664 to 1,488 dollars before rebate. Lifetime cost matters more than the sticker: an LFP pack at 6,000 to 8,500 cycles delivers energy at roughly 0.20 dollars per usable kilowatt-hour, an NMC pack at 3,000 cycles at roughly 0.33. Compare that against your tariff. Running the Numbers: One Battery, Three Markets Same house, same roof, same battery. Only the tariff changes. Adelaide, 41.91 cents, with a rebate 26 kWh generated, 7 used in daylight, 13 needed in the evening. Without a battery you export 19 and buy 13 back; with one you export 4.3 and buy 1. Line No battery 13.5 kWh battery Generated 26 kWh 26 kWh Used in daylight 7 kWh 7 kWh Exported 19 kWh 4.3 kWh Bought in the evening 13 kWh 1 kWh Daily net cost 4.50 AUD 0.20 AUD Annual net cost 1,643 AUD 74 AUD Annual saving none 1,569 AUD Installed after rebate none 11,360 to 13,360 AUD Simple payback not applicable 7.3 to 8.5 years The full derivation, including the 14.7 kWh the battery absorbs daily, sits in our Australian guide to home energy storage. Seven to eight and a half years needs both the 37 cent spread and the 3,200 dollar rebate. Remove either and it stops working. Same hardware, different tariffs. Each bar is one 13.5 kWh battery shifting 12 kWh a day, measured against what it cost to install. A US state at 18.19 cents with full net metering Now change one variable. Same battery, same 26 kWh, but the utility credits every exported unit at retail, as a number of US states still do. Without a battery: 19 kWh exported at 18.19 cents earns 3.46 dollars, 13 kWh bought costs 2.37, so you end the day 1.09 in credit. With one: 4.3 exported for 0.78, 1 bought for 0.18, and you end 0.60 in credit. The battery made you 0.49 dollars a day worse off. It moved a kilowatt-hour from an export worth 18.19 cents to a self-consumption worth the same, and paid the round-trip losses. There is no arbitrage to capture. Buy for backup if you want backup, not for payback. The same state with a 5 cent export rate Change the export rate instead, which is what several states did when they left full net metering. Without a battery: 19 exported for 0.95, 13 bought for 2.37, net cost 1.41 a day. With one: 4.3 exported for 0.22, 1 bought for 0.18, net cost near zero. That is 1.45 dollars a day, 528 a year. Against an 11,000 to 18,500 dollar install with no federal credit in 2026, payback is 21 to 35 years. The battery will not outlast its own payback, and an installer who says otherwise is using a pre-2026 subsidy. Germany and the UK sit between these cases: about 1,156 euros a year at 37.3 cents with an EEG export rate near 8.9, about 885 pounds at 26.32 pence with 5 pence export. South Africa runs the other way: at 3.56 rand with nothing paid for exports, the avoided cost is 15,593 rand a year. When the Answer Is No Four cases where the arithmetic does not close. Your utility credits exports at the full retail rate. The arbitrage is zero and the round-trip losses are yours. This is the most common reason a battery misses its quoted payback. Your evening load is small. A 10 kWh battery serving a 3 kWh evening load cycles a third of its capacity, so the return is a third of the headline. You are moving within a few years. Payback runs seven to eight years in a good market. Sell in year three and the rest goes to the buyer. Your tariff is already low and stable. At the 11.82 cents North Dakota averages, the battery returns about 250 dollars a year. No subsidy closes a 15,000 dollar gap. Standards and Certification Certification is not a formality. A battery that fails the grid-connection test cannot be commissioned; one that fails the transport test never arrives. Standard Scope Where it applies IEC 62619 Safety of industrial lithium cells and batteries Cell and pack level, the base requirement IEC 63056 Secondary cells for stationary storage More specific to ESS than 62619 UN 38.3 Transport of lithium batteries Every imported pack AS/NZS 4777.2 Grid connection of energy systems via inverters Australia AS/NZS 5139 Safety of battery systems with power conversion equipment Australia, location and fire separation VDE-AR-N 4105 Grid connection of generating plants Germany IEEE 1547 Interconnection of distributed energy resources United States G99 Connection of generation to distribution networks United Kingdom Four Questions Before You Buy What is the goal? Self-consumption, backup, arbitrage, or a combination. The answer sets the minimum size, and the wrong goal is expensive in both directions. What is your evening load? List the appliances and their wattage. That sets inverter power, and capacity follows from the hours you want to cover. What does your tariff actually say? The retail rate, the export rate, and whether export is credited at retail or at avoided cost. Without the third number you cannot estimate payback. What is available this year? Check the national programme, any state scheme and the utility, then check whether it is still open. Two of the five markets above closed theirs since 2024. What GreenMore Supplies GreenMore builds LiFePO4 storage in stackable modules and in all-in-one units with the inverter integrated, sized against the evening load rather than a round number. We supply the pack, the certification file and the cycle curve at your intended depth of discharge. Specifying for a distributor or installer? Send the destination market and the tariff structure and we will run the numbers. Start with the stackable battery modules, the all-in-one home energy storage system, or the full home energy storage range. Frequently Asked Questions Is a home battery worth it without solar panels? It can be, but the mechanism is different. Without solar the battery charges off-peak and discharges on-peak, so the return depends on the peak-to-off-peak ratio. At 2x or better the arbitrage carries the case; below 1.5x round-trip losses eat most of the spread. How long does a home battery take to pay for itself? Five to ten years where the spread is wide and a subsidy exists, which describes South Australia and parts of Germany. Twenty years or more where the spread is narrow with no subsidy, which describes much of the United States in 2026. Where exports are credited at retail, it never arrives. Does a battery add value when I sell the house? Less than owners expect. Valuers in most markets have no line item for storage, so the battery is priced as part of the general condition of the property rather than as an income-producing asset. What size battery does a typical home need? Size it against the evening load, not the solar array. A home drawing 8 to 13 kWh between sunset and midnight needs 10 to 13.5 kWh of usable capacity; one drawing 5 kWh needs 5 to 7. Sizing to the array is the most expensive mistake in this category. How long will a home battery last? An LFP pack rated at 6,000 cycles to 80% of initial capacity, cycling once a day, is about 16 years of cycles. Real life is shorter because of temperature, depth of discharge and how hard the inverter pushes it. Check the cycle curve, not the headline figure. Should I buy now or wait for prices to fall? Both reasons to wait have weakened. Hardware prices are no longer falling fast enough to offset a shrinking subsidy, and in Australia the certificate factor drops about 16% between 2026 and 2027 on identical equipment. If the numbers do not work today, waiting will not fix them. PL Peter Lu Energy Storage Product Manager, GreenMore Peter works with distributors, installers and system integrators to size residential and commercial storage around real load profiles. He focuses on LiFePO4 systems that match the inverter, the grid rules and the tariff of each destination market. Updated on November 17, 2026
  • How long does a 10 kWh battery last for a family?
    How long does a 10 kWh battery last for a family? May 25, 2025
    A 10 kWh home battery lasts between 4.5 hours and 29 hours. Both figures are correct, and neither has anything to do with the battery. The 4.5-hour number is a family of four in an all-electric house running the air conditioning through a summer outage. The 29-hour number is a couple in a flat with gas heating, keeping the fridge, the router and a few lamps alive. Same box on the wall, a 6-fold spread in the answer. Which is why the useful question is not how long a 10 kWh battery lasts, but how much of your house you are asking it to carry. Nameplate is not what you can use A 10 kWh battery holds 10 kWh the way a 750 ml bottle holds 750 ml. You do not drink the last of it, and the battery does not go to zero either. Repeated full discharges wear the cells, so manufacturers set a depth of discharge limit, usually 90 to 95 percent on a LiFePO4 pack. Usable capacity = nameplate × depth of discharge × inverter efficiency Ten kilowatt-hours at 90 percent depth and 94 percent conversion gives 8.46 kWh at the socket. That is the number to work from. The rest is reserved for the cells, or lost as heat in the inverter. Sellers quote whichever figure looks better. Two batteries both labelled 10 kWh can differ by a kilowatt-hour of usable energy if one allows 95 percent depth and the other 85. Ask for the depth of discharge and the round-trip efficiency before comparing prices. One appliance at a time Divide the usable energy by the load and you have hours. The trouble is that a load list is not a single number, and one column is missing from every datasheet. Load Runs at Surges to Hours on 8.46 kWh LED lighting, four rooms 100–200 W same 42–85 Router, TV, laptop 100–200 W same 42–85 Refrigerator 150–250 W 2–3× 34–56 Furnace blower 300–800 W 3–4× 11–28 Microwave 1,000 W same 8.5 Window air conditioner 1,000–1,500 W 5–6× 5.6–8.5 Central air, 3 ton 2,800–3,000 W 5–6× 2.8–3 The surge column is the one that stops installations. A 3-ton condenser with a locked rotor rating of 85 A pulls 85 × 240 = 20,400 W for a second or two. A 10 kWh battery with a 5 kW inverter cannot start it, no matter how much energy is stored. A soft-start kit cuts the inrush by 50 to 70 percent and makes the difference. Fridges and furnace blowers cycle, so their real consumption is a fraction of the running figure. Lighting and networking do not. Add up what runs simultaneously, not what exists in the house. A family, not an appliance Household consumption varies by a factor of six across the same battery, and the driver is heating and cooling, not the number of people. The US average is about 29 kWh a day, according to the EIA, with roughly 24 kWh of that outside space heating. Household Daily use A 10 kWh battery covers Couple, flat, gas heating 6–8 kWh 25–34 hours Family of four, gas heating 10–13 kWh 16–20 hours Family of four, all-electric 25–30 kWh 7–8 hours Family of four, all-electric, air conditioning 40–50 kWh 4–5 hours That last row is why a 10 kWh battery is almost never connected to a whole house. It is connected to a subpanel holding the circuits that matter, and the runtime jumps back to 12 hours or more because the load drops from 3,000 W to 700. The same arithmetic explains a question that arrives by email most weeks: why does my app show 100 percent in the morning and 30 percent by nine at night? Nothing is broken. The house is drawing 2 to 3 kW in the evening, and 8.46 kWh does not go far at that rate. Usable capacity fixed at 8.46 kWh. The only variable is what the house is drawing. Cold weather takes another bite Every figure so far assumes a cell temperature near 25°C, which is where manufacturers measure the datasheet. Below freezing, the electrolyte thickens, internal resistance rises, and some of the stored energy becomes hard to extract. Cell temperature Usable capacity Hours at 700 W 25°C 100% — 8.46 kWh 12.1 10°C 95–98% 11.7 0°C 85–90% 10.6 −10°C 70–80% 9.1 −20°C 60–70% 7.9 Two things get lost in that table. First, it describes cell temperature, not air temperature. A wall-mounted unit weighs 100 kg and takes 12 to 24 hours of sustained cold before the cells catch up with the weather, so a garage installation rarely sees the outdoor low. Second, the capacity is not gone. Warm the pack back to 15°C and it returns. Cold storage is gentle on lithium cells; cold charging is what causes damage, which is why every quality BMS blocks charge below zero. Heat is the opposite problem and the more expensive one. A pack held at 25°C reaches 6,000 cycles before dropping to 80 percent capacity. The same pack at 45°C reaches about 3,500. That is 42 percent of its life spent on a hot wall. Solar changes the answer All of the above assumes no recharge. With an array on the roof, the outage is measured in weather rather than stored hours, and 10 kWh becomes a buffer rather than a tank. A family drawing 700 W overnight needs about 5 kWh to reach sunrise, which a modest array replaces by mid-morning on a clear day. The condition is that the inverter accepts PV input while islanded. Plenty of storage systems charge from the grid only, and a sunny outage then turns into a countdown. Ask before buying. In ordinary operation the battery is rarely emptied. The pattern is one shallow cycle a day: charge from solar or off-peak grid, discharge across the evening, repeat. Which brings up the second meaning of the question. How many years, not how many hours LiFePO4 home batteries are commonly warranted for ten years or a stated cycle count, whichever comes first, with a capacity retention floor around 70 to 80 percent. Three things move the real number: Cycle depth. Shallow daily cycles wear less than regular full discharges. A pack run between 30 and 80 percent will outlast one run between 5 and 100. Temperature. Cool and stable beats warm. The 25°C against 45°C gap above is worth more than any other single choice. Charge and discharge rate. Staying inside the rated C-rate avoids the heat that drives the fade. Cycle-life claims need their test conditions attached. Six thousand cycles at 60 percent depth and six thousand at 90 percent are different products with the same headline. Ask for the depth and the temperature the figure was measured at, and for the capacity the warranty still guarantees in year ten. Is 10 kWh the right size For a household focused on evening self-consumption and short outages, 10 kWh is a sensible middle. A 3,000 kWh-a-year house cycling 250 times puts about 2,500 kWh through the pack annually, which a 10 kWh unit handles at roughly one cycle a day. Installed cost runs $12,000 to $18,000 in the United States, or $1,200 to $1,800 per kilowatt-hour, and the Australian price index tracks the same band. A portable station costs $300 to $500 per kilowatt-hour, so the premium for automatic switchover, a permit and a system warranty is three to five times. Spread over 6,000 cycles the storage itself works out at 2 to 3 cents per kilowatt-hour moved, which is where the economics either work or do not. If outages are long, or the house is all-electric, go to 15 or 20 kWh, or buy a modular system and add packs later. Size from your own load list, not from an average-household table. In Australia, the Clean Energy Council battery list names every model that qualifies for a rebate, which is a faster filter than any review site. One thing changed in 2026 that belongs in the arithmetic. The residential clean energy credit under section 25D ended for property placed in service after 31 December 2025, so a US buyer this year has no federal credit to subtract. Any quote still showing 30 percent is working from last year. The wall-mounted 10 kWh unit and the stacked modular range cover both approaches, with the full list on the home energy storage page. For choosing what to back up, see choosing a home backup power system. If panels are already on the roof, adding storage to an existing system covers the coupling question, and the 20 kWh cost breakdown covers the next size up. Send a load list through the contact page and we will size it against your numbers. Frequently Asked Questions How long will a 10 kWh battery run a house? Between 4.5 hours and 29 hours, depending on the load. A family of four all-electric with air conditioning draws 40 to 50 kWh a day and empties 8.46 kWh of usable capacity in about five hours. A couple keeping the fridge, lights and internet alive at 300 W gets 28 hours. Most installed systems sit in the 10 to 20 hour range because they serve a critical loads subpanel, not the whole house. Why does a 10 kWh battery only show 9 kWh available? Depth of discharge and conversion loss. The pack reserves 5 to 10 percent to avoid wearing the cells, and the inverter consumes a few percent converting DC to AC. Ten kilowatt-hours at 90 percent depth and 94 percent efficiency leaves 8.46 kWh at the socket. Some systems report usable capacity in the app, some report state of charge against nameplate, which is why two apps can disagree. How long will a 10 kWh battery run a refrigerator? About 34 to 56 hours on its own. A modern fridge draws 150 to 250 W while the compressor runs but cycles on and off, so it averages well under 100 W. Add lights, internet and heating controls and the combined load climbs to 500 or 700 W, which drops coverage to 12 to 17 hours. Does cold weather shorten battery runtime? Yes, temporarily. At 0°C a LiFePO4 pack delivers 85 to 90 percent of its rated capacity, at minus 10°C about 75 percent, at minus 20°C around 65 percent. The energy is still there and returns as the cells warm. Note that this describes cell temperature, and a sheltered indoor unit stays far warmer than the outdoor air. How many years does a 10 kWh battery last? Ten years or the stated cycle count, whichever comes first, is the standard warranty. Real service life depends on depth of discharge, temperature and C-rate. A pack kept near 25°C, cycled shallow and inside its rated current will reach its warranted retention. One held at 45°C will lose roughly 40 percent of its cycle life. Is 10 kWh enough for a whole house? Rarely. A US household averages about 29 kWh a day, so 8.46 kWh of usable capacity covers roughly seven hours at normal consumption. Whole-home backup needs 25 to 55 kWh, and in the United States section 702.4 of the electrical code may require the source to carry the full service rating, which for a 200 A panel means 48 kW. A 10 kWh battery belongs on a critical loads subpanel. PL Peter Lu Energy Storage Product Manager, GreenMore Sizes residential storage systems against real load lists, and writes about the parts of the quote that installers leave out. Updated on November 17, 2026

Subscribe To Our Newsletter

Stay up to date with GreenMore. We share new BIPV solar tile releases, product and certification updates, and field notes from our projects — no fluff, just the things that matter to installers, distributors, and system integrators. If there's something you'd like to see covered, drop us a line — we read every reply.

Copyright @ 2026 GreenMore All Rights Reserved. Network Supported

Sitemap / Blog / Xml / Privacy Policy

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Home

Products

WhatsApp

contact